Babies and Fashion Dolls.... Part Two

-

In part one we looked at babies for fashion dolls. We also looked at their sizes.

Now in part two I will be showing you what they look like with a fashion doll.

First up the smallest of the small mt 'premature'  baby in an incubator (well that's what it will be one day)

The stand was a Barbie hanging rack that came with the Launderette gift set. The boxes are the lids to mini car display boxes.



And here is baby out of the incubator

New born babies 

Generic babies that come with pregnant fashion dolls




Mattel (Midge baby)


Hand made babies






Doll house baby







Up next OOAK babies from Etsy, or E.Bay or gifts






Now going back to Mattel babies with Krissy as a baby



An OOAK Krissy

One year old Krissy

An OOAK Krissy

Also OOAK 

A couple of random Mattel babies




The newer Skipper Inc babies




A generic baby that came with fashion doll sets

And the new My Mini Baby babies from Zuru




Thank you for looking and please feel free to leave comments.

Next up Babies nursery furniture... Part Three

And if you missed Part One Babies Part One



Comments

Post a Comment

Popular posts from this blog

More Wardrobe ideas

-
Image
Some more wardrobe ideas....  I covered the shoe storage with plexiglass held on with magnets. As you can see there are so many things you can do with this basic idea. Big boxes, small boxes. With rails and/or shelving.
Read more

Simple Wardrobes And Storage

-
Image
I have a TON of doll clothing and after years of rummaging through bags and never finding what I'm looking for or even remembering what I have so I thought it was time I made some quick, simple and cheap storage.  The cheapest is to use a doll box and just fit a bar for hanging but I wanted something just a little more so this is what I came up with.... You will need Foamcore board I used 5mm thick board 60cm x 84cm Foam 2 Foam glue You can use any glue but this works best I think Ruler Tape measure Pencil Something sharp to cut with (craft knife Cutting board I have a big board but a smaller one would work Metal ruler if possible (Helps with cutting a straight line)  The rods are the metal rods from the Integrity Doll stands. They are great as they are adjustable.  All of the above can be found on E.Bay or craft stores I'm giving you the sizes I use but you can make your units any size you wish. Measure 40cm longways mark and cut put other piece of board t
Read more

Painting Plastic

-
Image
I've touch on this before but here I will go through the prose step by step... First up room temperatures. Even before you start if you are going to use spray paint then outside or a well ventilated room is a must. Not hot, not cold and not raining. Oh, and no wind...very important no wind if spraying outside... not an issue if working indoors. Remember the sprays do like to float about a bit and all surfaces need to be covered or use a spray box. This can be just an old cardboard box or something you make yourself. My table in the garden is just for spraying and is well away from the plants etc Another must is a mask, I do a lot so mines a bit fancy (I also have Asthma) but a basic mask from your local DIY would be fine  Spray paints are easy enough to find just look around your local DIY or craft store, there is also E.Bay and Amazon.  Start by cleaning what you want to paint then once dry I always use a primer, they come in three colours white, brown and
Read more