The Night Club

-
Not quite ready for patrons
 The club is on two floors
 The upper level is reach by climbing a spiral staircase
 Theirs a balcony looking out over the main entrance and the hotel opposite






 I'm going to paint the wood 'beams' to look like steel girders.
 If they don't look right I might try the tubing?

Still working on the penthouse.....

Penthouse railing

Comments

  1. Vanessa29 April 2012 at 12:53

    Fabulous nightclub. I'm anxious to see it finished.

    ReplyDelete
  2. Susan Cottrell29 April 2012 at 13:37

    Looking great; I'm excited to see the finished results too. :D

    ReplyDelete
  3. Georgia Girl29 April 2012 at 16:52

    Love it! I am also anxiously awaiting the finished touch.

    ReplyDelete

Post a Comment

Popular posts from this blog

More Wardrobe ideas

-
Image
Some more wardrobe ideas....  I covered the shoe storage with plexiglass held on with magnets. As you can see there are so many things you can do with this basic idea. Big boxes, small boxes. With rails and/or shelving.
Read more

Simple Wardrobes And Storage

-
Image
I have a TON of doll clothing and after years of rummaging through bags and never finding what I'm looking for or even remembering what I have so I thought it was time I made some quick, simple and cheap storage.  The cheapest is to use a doll box and just fit a bar for hanging but I wanted something just a little more so this is what I came up with.... You will need Foamcore board I used 5mm thick board 60cm x 84cm Foam 2 Foam glue You can use any glue but this works best I think Ruler Tape measure Pencil Something sharp to cut with (craft knife Cutting board I have a big board but a smaller one would work Metal ruler if possible (Helps with cutting a straight line)  The rods are the metal rods from the Integrity Doll stands. They are great as they are adjustable.  All of the above can be found on E.Bay or craft stores I'm giving you the sizes I use but you can make your units any size you wish. Measure 40cm longways mark and cut put other piece of b...
Read more

Prams/ Stroller or what ever you call it!... Painting Plastic

-
Image
I have a little bit of a thing for 'babies' Barbie and co babies that is. I also love prams/buggies/strollers or whatever! For some time I had wanted a mini pram like you see so much in human size these days. Imagine my excitement when I spotted the new Skipper Babysitter Inc pram, it looked (almost) perfect. As soon as I spotted one on Amazon I had to get it AND it was not silly expensive. The pram's come in yellow with a white baby and pink with a black Baby. (Not my photo's) For some reason the pink pram is very hard to find in England, but I did find one on Amazon. The height was good too and worked well with the taller IT dolls. As you can see I painted mine  So next the painting thing The base parts come apart pretty easy but the top peace (bucket) can not be taken apart. I wanted to paint the top of the bucket but leave the base grey. All the parts I did NOT want painted I coated with a couple of coats of school PVA glue While that...
Read more