Integrity Toys Diorama

-
First up there is a law someplace that says I should NEVER EVER be allowed near a glue gun! 
Now while the diorama was fun to make and the video instructions easy to follow, it did all go a little pear shaped due to my serious inability to use a glue gun! 
Anyway it's done, a lot of wonky walls and excess glue, plus a couple of burnt figures 
Look I even managed a blister (I'm clever like that!) 





 My assistant for today was Jordan 

Comments

  1. Anonymous8 September 2017 at 08:38

    It's really unfortunate you hurt yourself, I stay away from glue guns myself :-). The diorama looks fabulous though!

    ReplyDelete
  2. Suwi8 September 2017 at 09:50

    Thank you, I normally stay away myself but thought I would be able to handle a gun....I'm such a fool LOL

    ReplyDelete
  3. Tanvi27 November 2017 at 04:22

    Hi The Building of... THE PRIORS ... A Doll RoomTeam,

    My name is Anuj Agarwal. I'm Founder of Feedspot.

    I would like to personally congratulate you as your blog The Building of... THE PRIORS ... A Doll Roomhas been selected by our panelist as one of the Top 100 Doll Blogs on the web.

    https://blog.feedspot.com/doll_blogs/

    I personally give you a high-five and want to thank you for your contribution to this world. This is the most comprehensive list of Top 100 Doll Blogs on the internet and I’m honored to have you as part of this!

    Also, you have the honor of displaying the badge on your blog.

    Best,
    Anuj

    ReplyDelete

Post a Comment

Popular posts from this blog

More Wardrobe ideas

-
Image
Some more wardrobe ideas....  I covered the shoe storage with plexiglass held on with magnets. As you can see there are so many things you can do with this basic idea. Big boxes, small boxes. With rails and/or shelving.
Read more

Simple Wardrobes And Storage

-
Image
I have a TON of doll clothing and after years of rummaging through bags and never finding what I'm looking for or even remembering what I have so I thought it was time I made some quick, simple and cheap storage.  The cheapest is to use a doll box and just fit a bar for hanging but I wanted something just a little more so this is what I came up with.... You will need Foamcore board I used 5mm thick board 60cm x 84cm Foam 2 Foam glue You can use any glue but this works best I think Ruler Tape measure Pencil Something sharp to cut with (craft knife Cutting board I have a big board but a smaller one would work Metal ruler if possible (Helps with cutting a straight line)  The rods are the metal rods from the Integrity Doll stands. They are great as they are adjustable.  All of the above can be found on E.Bay or craft stores I'm giving you the sizes I use but you can make your units any size you wish. Measure 40cm longways mark and cut put other piece of board t
Read more

Painting Plastic

-
Image
I've touch on this before but here I will go through the prose step by step... First up room temperatures. Even before you start if you are going to use spray paint then outside or a well ventilated room is a must. Not hot, not cold and not raining. Oh, and no wind...very important no wind if spraying outside... not an issue if working indoors. Remember the sprays do like to float about a bit and all surfaces need to be covered or use a spray box. This can be just an old cardboard box or something you make yourself. My table in the garden is just for spraying and is well away from the plants etc Another must is a mask, I do a lot so mines a bit fancy (I also have Asthma) but a basic mask from your local DIY would be fine  Spray paints are easy enough to find just look around your local DIY or craft store, there is also E.Bay and Amazon.  Start by cleaning what you want to paint then once dry I always use a primer, they come in three colours white, brown and
Read more